How to fix Canon Error E02?

E02 means out of paper. Load paper in the rear tray and press the Black or Color button to resume.

Canon Error Codes → Complete Fix Database ⚡ All Models 2025

🔴 Most Common Canon Error Codes

Error E02 - Out of Paper

Affects: All PIXMA models

Easy Fix

📍 What It Means:

Printer cannot detect paper in the tray or paper feed issue.

⚡ Quick Fix:

1 Load paper in rear tray (10-20 sheets)
2 Adjust paper guides snugly
3 Press Black or Color button

🔧 If That Doesn't Work:

• Clean paper pickup rollers with damp cloth
• Try different paper (not curled/damp)
• Check for small paper pieces stuck inside
• Fan paper before loading
• Don't overfill tray (max 100 sheets)

Pro Tip: If happens frequently, rollers may be worn - clean with rubber rejuvenator.

Error E03 - Paper Jam

Affects: All Canon printers

Medium Fix

📍 Location Check Order:

1. Rear tray - Most common spot
2. Output slot - Front of printer
3. Inside printer - Open cover
4. Duplexer - If has auto-duplex

⚡ Removal Steps:

1. Turn OFF printer first
2. Open rear access door
3. Gently pull paper straight out
4. Check for torn pieces
5. Close all doors
6. Turn ON and test

⚠️ Never: Pull paper at an angle or use force - can damage gears

Error E04/E05 - Cartridge Problem

Affects: PIXMA series

Easy Fix

E04: Black cartridge issue | E05: Color cartridge issue

⚡ Fix Steps:

1. Open printer cover
2. Remove affected cartridge
3. Check for protective tape (remove if present)
4. Clean gold contacts with soft cloth
5. Reinstall firmly until clicks
6. Close cover

💡 Common Causes:

• Protective tape not removed
• Dirty electrical contacts
• Wrong cartridge model
• Non-genuine cartridge
• Cartridge not seated properly

Works with: PG-245, CL-246, PG-243, CL-244 cartridges

Error B200 - Print Head Error

Affects: PIXMA MG, MX, MP series

Serious

⚠️ Critical Error: Print head overheating or failure

⚡ Try These Fixes (In Order):

1
Remove & Clean Print Head
- • Turn off printer
- • Remove all cartridges
- • Lift gray lever to remove print head
- • Rinse with warm water, dry completely
- • Reinstall after 2 hours
2
Reset Printer
- • With printer OFF, hold Power button
- • Press Stop/Reset 5 times
- • Release Power button
3
Replace Print Head
If above fails, print head needs replacement ($50-100)

📋 Complete Error Code Database

Error 5100 - Carriage Error

Paper or obstruction blocking carriage movement

Common

Quick Fix:

1. Turn off printer
2. Check for paper scraps in carriage path
3. Move carriage manually (should slide freely)
4. Check timing strip (clear plastic strip)

Prevention:

• Don't overload paper tray
• Use correct paper size
• Keep printer dust-free

Error 6000 - Paper Feed Error

Paper tray positioning problem

Medium

Solution:

1. Open printer and check for jammed paper
2. Ensure paper tray is inserted correctly
3. Check paper isn't stuck to feed rollers
4. Power cycle: Off → Unplug 5 min → Restart

Error 5B00 - Waste Ink Absorber Full

Ink absorber pads need reset/replacement

Advanced

Fix Options:

1. Temporary: Press and hold Stop/Reset for 10 seconds
2. Reset Counter: Use service mode (advanced users)
3. Permanent: Replace absorber pads at service center

Note: Temporary fix works ~100 pages before returning

Error 1403 - Print Head Not Installed

Print head not detected properly

Easy

Fix:

1. Remove print head completely
2. Clean copper contacts with eraser
3. Clean printer contacts with alcohol swab
4. Reinstall firmly until clicks
5. Install cartridges and test

📊 Quick Reference Table

Code	Meaning	Quick Fix
E08	Ink absorber almost full	Press Stop/Reset for 5 sec
E13	Remaining ink unknown	Press Stop/Reset to continue
E14	Cartridge not recognized	Replace with genuine Canon
E15	Cartridge not installed	Reinstall cartridge
E16	Ink has run out	Replace cartridge
E31	WiFi connection failed	Re-run wireless setup
E32	WiFi setup error	Check WPS or password
U052	Print head temperature	Let cool for 10 min
5200	Print head overheating	Turn off for 30 min
6A80	Printer board error	Power cycle printer

Canon Error Code Database